Monday, May 14, 2012

Crazy Accordion Book



Howdy Fellow Scrappers in Scrapland!

It's finally here!  It's finally finished!  The one and only...Crazy Accordion Booooooook!!! Hehehe...
It really didn't take me all that long to put it together, but it did take a while to get here on my blog.  There were many projects in between.  Those will work their way on here to eventually.

As promised and upon request.  I shall present to you the making of this super, fun book.  Nearly all of the materials here are provided by Echo Park, Happy Days.  How could I go wrong with a title like that?
"Doe Ne Keer Zot" is how you say, "Do Something Crazy" in Dutch.  As is our lives here in Belgium.  We speak "Flinglish" which is the catchy phrase I coined for our mix of English and Flemish that comes spewing out of international mouths. Hehehe....

OK, I don't want to mess around too much with lengthy explanations because this blog is gonna be a big one.  If you have any questions at all, feel free to leave them in the comments or hit me up with an email at:  lmtroch@live.com or whatever one is here.












Here are some of the supplies you will need.
Shown to the right in the first illustration is:
glue or craft dots, blue glitter paper, double sided tape,
foam tape (for dimension), wax pencil (for drawing on
pictures), pencil, exacto knife, corner rounder and tiny
detail scissors.


In the second illustration are small and large hole punches, red
glitter paper and a small circle punch.

In the third, is a tape dispenser, glue pen and rhinestones for extra bling.

In the fourth is shiny black paper, various chipboard letters, green and white glitter, blue glitter goo, ribbon, extra embellishing paper for background that was not in the kit and a black, Sharpie.  It's one of the few markers that doesn't bleed as much.







The first step is to cut your card stock to the size you would like your book to be, width wise.  Be careful not to go to wide or your book will not balance proper if you choose to want to stand it up as a display method.  Small is good, but keep in mind the size of pictures you want to use as well as the size of your embellishments in the kit.  Some are quite large and won't fit on your page if it is too small.




The second step is to have at least two of the same size card stock sheets as pictured above.  Same width, same length.  I simply folded a piece of card stock in half, the long way and that decided the width of
my book.  It also saved on paper.  Otherwise, you need several pieces of card stock to make your book.  I simply taped the two pieces together, end to end with regular tape because I knew I would cover over it with other paper.  The tricky part was folding it just right so that all of the pages came out the same size.  (Mine was not perfect.)  Once you have the accordion look and the pages are as even as you can make them, weigh something heavy on it and let it sit over night.  I use an old, huge scrapbooking book for the job.  You can make the book as long as you like by adding/taping more lengths to your book, but it looses stability.  Especially if you want to crank out some serious embellishments.  All things to keep in  mind.

You can see the papers I chose for the background of the cover (which is where I started).  I decided to cut the picture out, leaving out the background so that you could see more of the precious paper.  The border is provided in the E.P. Kit.  However, I blinged it up by using my tiny hole punch and some awesome, glitter, card stock paper and my Elmer's Craft glue pen to adhere.  The letters are also provided in the kit and I put them on a black background to make it pop.  Pow!  The "Silly" tab on the side is provided in the EP kit and fits  like a glove in this book.  The red, glitter circles are from the paper and circle punch, simply glued partially under the letters.



I started to work a bit backwards here.  When you adhere your designed paper to the card stock, always make sure that it goes slightly over the fold or crease in the book.  I used a combination of glue and a lot of double sided tape to adhere the design papers.  You have to be really careful that you get it just right.  If this intimidates you, then simply use glue because it allows for mistakes.  TIP:  I often peel back half of the double sided backing, make sure I have it lined up just right, adhere, then peel back more.


I continued with the horizontal lined paper on the next page, used my Fiskars shape cutter for the circle picture as well as the glitter circle, then my circle punch for the gum balls making sure to use the same colors in the candy dish on the embellishment provided in the kit.  Then the rounded corner punch for the black background.  I chose to use black as a contrasting color in this book and you will see it often throughout to help with cohesion.






You can see I have six pages on each side of the book.  I had so many funny pictures.  I think I will make a 12 x 12 book and incorporate the same silly scenario.  Below is the other side of the cover.  I adhered the two tabs from the kit together on a rigid, junk scrap then used double sided tape to adhere it to the book, then just papered over the top.  This side is fun polka dots.  I kept the red dot thing going, but added more bling with my glitter paper and circle punch and just snipped the circles in half and used glue dots to stick them for the effect you see here.  The letters are from the kit and are on top of a plain red scrap of paper then again on a black paper for a framed look.



 Next to the Funny Farm, I used the flower paper and overlapped it a bit with the polk dots.  You can see it covers two squares and goes slightly over the fold on the next page.  It's just easier that way.  I cut out the pictures, used flowers, the bottle cap and the journal cloud all from the kit.  I added the extra bling as on the supply list and even used the sample page as embellishments.  TIP:  Give your projects dimension by layering up the flowers like on the second page and use the sample sheet from your kits.  That's like free embellishments.  Reinforce them by using heavy paper underneath like old cereal boxes or the backing from embellishment packaging.



 As you can see below, I simply line up my next paper I want to use, then mark how far I want to go over and slice.  You can get out your ruler and measure everything to the 1/8th of an inch, but I've got better things to do! Hehehe...


Measured up in length and width...



 <--This is the back of the red, polka
dot sheet.  Shown is the double
sided tape I used to glue it on.

>There you can see I only wanted enough for one page.
 <Here, I'm measuring up the width with my pencil, of the yellow, scalloped border as a means to separate the pages.
>I'm cutting the border with an exacto so as not to waste.

 <To the left is a picture from the sample of the kit.  I reinforced the back for strength with heavy scrap paper then added the glue where I wanted the extra bling.
>To the right sprinkled on the glitter for pizazz!


Below, is the glittery, reinforced car applied to foamy tape for dimension and a black background for added poppage. Hehehe...


Here is the the finished page, below.  You apply your picture where you like.  I put it just next to the scalloped border, slightly higher.  Then added yellow, checked scrap paper to look like a ribbon.  Applied the word stickers from the kit to some polka dotty paper I had in my scrap bag that matched, lined them up with the edge of the picture and adhered.  The black and white border under the car is also from the kit.  Make sure that your embellishments are not too close to the folds of the book.



Above you will find the next page.  The picture was really big and I didn't want to waste all of my good paper from the package, so I measured up and used old scraps from my scrap bag.  That's the blue with polka dots.  The bottle caps are from the kit.  I cut out the top with the fine scissors as you can see and only used one page with a little extra over the crease.  I used more from the sample page with this flower,  added my own bling and used their orange flower as well as the word, "Adventure".  The chipboard letters are my own from a discount store.  I glittered them up and used the shiny, black background again.  They just looked kind of blah without it.  It wasn't easy, but the effect was great!



I love the picture above.  This is the Lego Shaquille and that is a foam sword. Hehehe...  There is a black, diamond border from the previous page that is provided in the kit, measured up and stuck.  More red polka dots and the left overs from the bottle caps as another border to the right of the new page.  That was simple!  A funny quote for a funny book will bring smiles if not a chuckle.  I smeared in some added color on the journal note to cover up a small fault. Hehehe....



Turning the book to the other side (again) and continuing...More black diamond border from the kit, an enormous picture, all overlapping just slightly, then red ribbon so that you cannot see where every fold is and where all the new pages start.



Rolling The Dice is super simple, yet I really love it!  You will find the diamond paper from the Happy Days kit is being used as the background for this page.  More shiny, black paper to form a border.  The red, glitter paper to form a frame (which BTW, never comes out perfect when I make it.)  TIP:  I use my paper cutter, take the picture and measure it up on the back of the paper I want to use as a frame and simply move in a few millimeters from the mark as I cut.  It's kind of lazy, but it goes really quickly that way.  The dice and sticker are from the kit.  I followed suit and framed and black backgrounded it.  Much depth on this page.


 Man!  That Crazy, Man Bag page was a toughy and I only kind of like it.  It took me forever to clip out the flowered pocket just right.  That's all it is though.  A clipped out pocket from the floral page in the kit, doubled sided with tape only on the button and glued slightly on the side, but not the top, to form a pocket for the tag and picture specifically cut to fit.  A little Happy Days lettering from the kit, of course and BOOM!  Finished!  Horitzontal, lined paper with polka dots on the back was used as the basis for this tag.  The "Fabulous" tab on one side and the "Hello" tab on the other side.  Black, shiny paper cut out with the circle punch, then cut in half, glue dotted to the bottom of the cornered picture then pimped up with the hole punch sized red, glitter paper.  The other side of the tag is blinged  out a bit more with added embellishments from the kit, hole puncher with glitter paper and a button for sensitive viewers. Hehehe...This side coincides with the other side of the book.



The last and final page was the continued use of the black and white paper from the kit, blue glitter paper for some super POW, repetitive use of the red glitter paper with flower punch and more blue, glitter paper for the center of the flower made by the tiny hole punch.  A few more embellishments from the kit and even more glitter with the blue, glitter goo, over the original white lines of the flower from the kit.  The bottom, left picture provides a pocket for me. Hehehe...Backgrounds are used on both pictures for some contrast and layering and scrappy circles to add color and happiness.

Hey!  That wasn't all that bad.  I thought it would take me all day to get this thing done.  I sure hope someone out in Blogland will be able to use this. LOL!  Share pictures of your accordion books or funny pictures.  I like funny....












No comments:

Post a Comment